Diamond Age Solutions Ltd.

Solvent for PLA now in trials

Vik Olliver — Sun, 05 May 2013 05:42:04 +0000

We’ve managed to find a local manufacturer of a solvent for PLA. This allows the lucky people with dual extruders to use PLA as a soluble support material for ABS. You simply drop the part into the solvent, warm to 60C and swirl. The solvent is slightly flammable but otherwise not particularly hazardous, and does not include anything restricted for drug or explosive manufacture etc. The solvent contains a simple catalyst which is hard to recover, but the bulk of the solvent can be reclaimed, in theory at least.

So if this is what you’ve been waiting for give us a call on 09 215 6091 and we’ll fill you in.

Remember, if you’re not part of the solution, you’re part of the precipitate

Vik :v)

Flyer Mis-prints

Tamara — Sat, 04 May 2013 05:19:36 +0000

Hello All,

Due to the speed at which our flyers were designed, I accidentally left some wrong pricings on there in regards to the 3mm, where the ’300m’ should be a ’1kg’. I apologize to anyone who got a bit hopeful.

-Tamara

Makertorium and some slight delay issues

Tamara — Wed, 24 Apr 2013 02:30:38 +0000

First off, Diamond Age Solutions will be manning a stall at this weekend’s Makertorium at Te Papa Museum in Wellington, New Zealand. Entry is free from 10am to 6pm, so come and have a look!

Secondly, the bad news. Both Vik and Ania are unwell, while Suz and Tamara will be unavailable from Thursday 25th- Tuesday 30th April 2013 due to Makertorium. This means that some of your orders may be a bit delayed, which we are very sorry about. We’ll still be checking our emails though, so we can still take orders and answer questions.

Again, apologizes for the disruption,

Tamara Olliver

Office Manager

Rroofl Kit Version 1.0 now available!

Tamara — Wed, 13 Mar 2013 23:12:05 +0000

We have now added our new Rroofl Kit (Version 1.0) to the website, which will soon be joined by our ‘Standard M6 Brass Extruder Tips’, and our ‘RepRap Seconds’ (which will be priced per plastic weight and that’s it). If there are any other products you’d like to see, feel free to suggest some!

Now available – Virgin Black PLA at no extra charge

Vik Olliver — Sun, 17 Feb 2013 02:13:58 +0000

One of the common things plastics manufacturers do – including us – is to recycle the remains of a coloured run into the black, traditionally run last. It looks the same because it’s all loaded with carbon black pigment. We don’t need a photo of black do we? Good.

This is a sensible environmental behaviour, but makes the melting point of the black a little variable as it will have other pigments mixed in with it. All the different colours have slightly different melting points and viscosity, as they’re all – pretty obviously – different materials.

So, as we get a lot of perfectionists using our PLA who want it to do exactly the same thing every time, we’ve marked some pristine batches of 1kg Black spool just for them. You can now request our “Virgin Black PLA” if you e-mail sales at the time of your order, though stocks are limited – on the plus side, no extra charge! Do give us your feedback on this one.

Vik :v)

To our Australian customers

Tamara — Thu, 31 Jan 2013 02:40:51 +0000

We’re just updating our postage currently, so there may be some bugs. Feel free to contact us at sales@diamondage.co.nz with any concerns.

Cheers

Tamara

2013 Kicks off, doors open

Vik Olliver — Sun, 06 Jan 2013 20:41:02 +0000

We’ve slept off the Xmas pud and pulled down all the decorations. The doors are open and it’s back to business again.

Happy New Year 2013!

Vik Olliver — Sat, 29 Dec 2012 02:14:20 +0000

We’re still open, but operating in Party Mode until we bail everyone out after the New Year celebrations

We wish all our clients and followers an amazing 2013!

Mocca Chocolata Released Into The Wild

Vik Olliver — Tue, 11 Dec 2012 06:58:07 +0000

In the care of her new keeper, Roger, the Rroofl RepRap Mocca Chocolata has been released into the wild, with a kilo if filament to see her through until she is established in her natural habitat. We will take pictures once she has settled down.

Alpha RepRap Test Client Installed in Workshop

Vik Olliver — Mon, 03 Dec 2012 23:17:09 +0000

Test subject “Roger” has been unleashed upon our first Alpha Kit. In yesterday’s half-day session he managed to turn this:

Into this:

We wish him luck in today’s session and recognize the great sacrifice he his making to smooth the path for the rest of you